Friday, February 5, 2010

What Size Trowel Do You Use For Ceramic Tile On A Wall What Trowel Size To Use When Installing Ceramic Wall Tile?

What trowel size to use when installing ceramic wall tile? - what size trowel do you use for ceramic tile on a wall

The tiles are installed in the shower and we use the putty (Omni-Grip) as an adhesive. It is installed on cement. Our tile size is 13 x 8 cm. We will install the brick-shaped stones to when there is a difference. What size trowel should I use? Other suggestions you can offer would be welcome

3 comments:

leftylea... said...

Use a 1 / 8 "or 3 / 16" notched trowel of 1 / 4 "is too deep and will have a difficult time to stay. Can be found using separators, because your work will look professional, No Forget not begin to be at the lower end and on. When work on the mortar does not know the corners of the shower, as they should be sealed w / silicone to make it watertight, and remember to use the bucket with water when you are completed and before the use of the shower. I hope that helps and good luck with it.

rob s said...

BD is right .. You must have a Mortor use thinset to use .. I use a 1 / 4 x 1 / 4 First Place at least .. Or 3/8x 3 / 8 square notch, if you have a tab, flush, or have warpped is great and GL tendacy in the fields

Arthur G said...

Pallets vary in shape and size, usually 3 / 16 "V-shaped notch in the first half inches square. The size of the right palette is basically the same as the size of the tiles, more tiles - the smaller the paddle, the largest brick - the greater the range.
I use 1 / 2 "x 1 / 2" square notch for tile size.

Post a Comment